Siemens HiPath 4000 - Features - Configuration; Allow Refuse

Administration
A31003-01010-M11-1-7619, 29/01/2007
3-40 HiPath 8000 - OpenStage 60/80, Administrator Manual
administration.fm
Features - Configuration
3.5 Features - Configuration
3.5.1 Allow Refuse
This parameter defines whether the Refuse Call feature is available on the phone. The possible
values are „Yes“ or „No“.
Administration via WBM
System > Features > Configuration
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
|
--- General
|
--- Allow refuse