EasyManua.ls Logo

Siemens Hipath 5000 - 2 Startup; Prerequisites

Siemens Hipath 5000
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
inbetriebnahme.fm
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
2-1
Startup
Prerequisites
2Startup
2.1 Prerequisites
The advance acts as an endpoint client on an IP telephony network, and has the following net-
work requirements:
• An Ethernet connection to a LAN
• A HiPath Communications System: HiPath 2000, HiPath 3000, HiPath 5000, or
HiPath
OpenOffice
• An FTP Server for file transfer, e. g. firmware, configuration data, application software
• A Dynamic Host Configuration Protocol (DHCP) server (recommended).
7
Only use switches in the LAN to which the OpenStage phone is connected. An
operation at hubs can cause serious malfunctions in the hub and in the whole
network.

Table of Contents

Other manuals for Siemens Hipath 5000

Related product manuals