Siemens Hipath 5000 - Functions You Can Use

Startup
A31003-S2010-M100-10-7619, 27/08/2008
2-6 HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
inbetriebnahme.fm
Quick Start
2.3 Quick Start
This section describes a typical case: the setup of an OpenStage endpoint in an environment
using a DHCP server and the web interface. For different scenarios, cross-references to the
corresponding section of the administration chapter are given.
>
Alternatively, the DLS (Deployment Service) administration tool can be used. Its
Plug & Play functionality allows to provide the phone with configuration data by as-
signing an existing data profile to the phone’s MAC address or E.164 number. For
further information, see the Deployment Service Administration Manual.
>
Any settings made by a DHCP server are not configurable by other configuration
tools.