Siemens Hipath 5000 - Conducting a Conference

administration.fm
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
3-3
Administration
Access via Local Phone
OpenStage 20
Use the 3-way Navigator to navigate and execute administrative actions in the administra-
tion menu.
4. Select a parameter
If a parameter is set by choosing a value from a selective list, an arrow symbol appears in
the parameter field that has the focus. Press the key to enter the selective list. Use the Sen-
sor Wheel resp. the m and l key to scroll up and down in the selective list. To select a list
entry, press the i key.
5. Enter the parameter value
For selecting numbers and characters, you can use special keys. See the following table:
Key Function
*
Switch to punctuation and special characters.
#
Toggle between lowercase characters, uppercase characters, and digits in
the following order:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
Table 3-1
Press the mkey briefly:
- scroll up
Hold down:
- scroll to top of list
Press the
l key briefly:
- scroll down
Hold down:
- scroll to end of list
Press the
i key:
- confirm entries
- perform an action