en Before using for the first time
16
■ Malfunctions may occur when using filtered or
demineralised water.
The appliance may request that you top up the water
tank even though it may be full, or operation with
steam is cancelled after approx. two minutes.
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio
of one to one.
Notes
■ If your water is very hard, we recommend that you
use softened water.
■ If you only use softened water, you can set the water
hardness range to "softened".
■ If you use mineral water, set the water hardness
range to "4 very hard".
■ If you use mineral water, you must only use non-
carbonated mineral water.
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
Note: You can change these settings at any time in the
basic settings. ~ "Basic settings" on page 20
Setting the language
German is the preset language.
1. Use the rotary selector to select the required
language.
2. Touch the Æ arrow.
The next setting appears.
Setting the clock
The time starts at 12:00.
1. Use the rotary selector to set the current time.
2. Touch the Æ arrow
Setting the date
The default date is 1.1.2014.
1. Always touch the Æ arrow to move to the next
setting.
2. Use the rotary selector to set the current day, month
and year.
Setting the water hardness
The default water hardness setting is "very hard".
Change this setting if your water is softer. You can ask
your water supplier about the water hardness level.
1. Set the hardness using the rotary selector.
2. Touch the Æ arrow.
A message appears on the display confirming that
the initial use has been completed.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
1. Remove the accessories from the cooking
compartment.
2. Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3. Before heating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
4. Press the on/off button to switch on the appliance.
5. Fill the water tank. ~ "Filling the water tank"
on page 24
6. Set the specified type of heating, temperature and
steam injection, then start the appliance.
7. Keep the kitchen ventilated while the appliance is
heating.
8. Use the on/off button to switch off the appliance
once the specified time has elapsed.
9. Wait for the cooking compartment to cool down.
10. Clean the smooth surfaces with soapy water and a
dish cloth.
11. Empty the water tank and dry the cooking
compartment. ~ "After every steam operation"
on page 25
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
Water hardness range Setting
0 0 softened
1 (up to 1.3 mmol/l) 1 soft
2 (1.3 - 2.5 mmol/l) 2 medium
3 (2.5 - 3.8 mmol/l) 3 hard
4 (above 3.8 mmol/l) 4 very hard
Settings
Type of heating
4D hot air : with added steam ("high")
Temperature Maximum
Cooking time 1 hour
To Next Page
Loading...
