Siemens LMV52.440B1 - Control (Characteristics)

To Next Page

To Previous Page

LMVSeries TechnicalInstructions 

 LV5‐1000

SCCInc. Page50 Section3



DeaO2/Stp36 – Energizing input X5‐03.2 disables O

 trim, while de‐energizing X5‐03.2 enables O

 trim (LMV52 only).

EnergizinginputX5‐03.3allowstheLMV5toprogresspastphase36.IfX5‐03.3isde‐energized,theLMV5willremain

inphase36indefinitely.

CoolFctStby–Thissettinghasnoeffect(LMV50only).

AutoDeactO2 – Energizing input X5‐03.3 will  deactivate O2 trim by setting O2 trim OptgMode to auto deact.O2 trim

OptgModemustbesettoConAutoDeacforthisfunctiontowork.De‐energizingX5‐03.3setstheO2trimOptgMode

backtoConAutoDeac.TerminalX5‐03.2hasnofunctionwiththissetting.



HOME

Other manuals for Siemens LMV52.440B1