right page (13) of MC60 Maguro, kurz, en, A31008-H5760-A1-1-7619 (14.08.2003, 11:10)
Siemens AG 2003, G:\Mobil\L55\MC60_Maguro\en\sug\MC60K_Startup.fm
13Security
VAR Language: English; VAR issue date: 16-Juli-2003
Security
§Menu§ ¢ m ¢ Security
¢ Select a function
The phone and SIM card are
protected against misuse by several
security codes.
Codes
PIN control
You can stop the PIN prompt being
activated when the phone is
switched on, but you then risk
unauthorised use of the phone.
§Select§ Press, then enter PIN and
confirm with §OK§.
§Change§ Press and confirm with
§OK§ .
Change PIN
You can change the PIN to any 4- to
8-digit number you find easier to
remember.
J Enter current PIN and
confirm with §OK§ .
J
,
§OK§ Enter new PIN.
J
,
§OK§ Reenter new PIN.
Change PIN2
(Display only if PIN2 is available).
Proceed as with Change PIN.
Chg.phonecode
(Change phone code)
You define the phone code
(4-8 digits) the first time you call up
a protected function. It is then valid
for all phone-code protected
functions.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Preventing accidental
activation
Even if PIN control is deactivated
confirmation is required to switch on
the phone. This prevents the phone
from being switched on accidentally,
e. g. when carried in a pocket or
whilst you are on an aircraft.
B
Hold down, then confirm
with §OK§ . The phone
switches on.
Keep these confidential numbers in a
safe place where you can access them
again if required.
To Next Page
Loading...
Need help?
General
