Siemens MC60 - Swapping Calls

©
Siemens AG 2003, G:\Mobil\L55\MC60_Maguro\en\sug\MC60K_Phone.fm
left page (16) of MC60 Maguro, kurz, en, A31008-H5760-A1-1-7619 (14.08.2003, 11:10)
Calling16
VAR Language: English; VAR issue date: 16-Juli-2003
Swapping calls b
• You can call another number
during a call.
§y menu§ Open call menu
Hold Put current call on hold.
Now dial the new phone number.
When the new connection is
established:
§y menu§ Open call menu
Swap Swap back and forth
between both calls.
• You are advised during a call that
there is another call waiting by a
special "call waiting" tone (p. 40).
§Swap§ Accept the waiting call
and put the current call on
hold. To swap between
the two calls, see above.
Or
B
End the current call.
§Answer§ Accept new call.
Conference b
• Call up to 5 parties and link them
together in a conference call.
When a call is established:
§y menu§ Open menu and select
Hold. The current call is
put on hold.
J
Now dial a new number.
When the new connec-
tion is established ...
§y menu§ …open menu and select
Conference. The held call is
joined.
Repeat procedure until all
participants are linked together
(up to 5 participants).
End
B
All calls in the conference
are ended simultaneously
when the End key is
pressed.