Siemens MC60 Operating Instructions

©
Siemens AG 2003, G:\Mobil\L55\MC60_Maguro\en\sug\MC60K_Phone.fm
left page (14) of MC60 Maguro, kurz, en, A31008-H5760-A1-1-7619 (14.08.2003, 11:10)
Calling14
VAR Language: English; VAR issue date: 16-Juli-2003
Calling
Dialling with number keys
The phone must be switched on
(standby mode).
J
Enter number
(always with area
code/international
dialling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
A
Press the Call key.
The displayed phone
number is dialled.
End call
B
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
G
Use the top of the control
key to start adjusting the
volume. Then press
top/bottom to adjust the
volume as required (only
possible during a
conversation).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial
To redial numbers that were dialled
previously:
A
Press the Call key once.
I
Pick out the required
phone number from the
list, then to dial ...
A Press ...
If the number is busy
Auto. redial
§Auto dial§ Press. The phone number
is automatically dialled
ten times at increasing
time intervals.
Or
Call back b
§Call back§ Press. Your phone rings
when the busy number is
free.
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
15 minutes.
International dialling codes
0
Hold down until a “+” is
displayed.
§+List§ Press and select country.

Siemens MC60 Specifications

General

Brand	Siemens
Model	MC60
Category	Cell Phone
Language	English