Siemens MC60 - Reading and Replying to SMS; Accessing and Reading SMS; SMS Reply Options

right page (41) of MC60 Maguro, kurz, en, A31008-H5760-A1-1-7619 (14.08.2003, 11:11)
©
Siemens AG 2003, G:\Mobil\L55\MC60_Maguro\en\sug\MC60K_Setup.fm
41Setup
VAR Language: English; VAR issue date: 16-Juli-2003
J
Enter the phone number
to which the caller will be
diverted (if not already
entered).
§OK§ Confirm. After a short
pause, the setting is
confirmed by the
network.
All calls
b
All calls are diverted.
n Symbol in the top line of
the display in standby
mode.
Other possibilities for divert:
Not reachable, No reply, Busy, Receiving
fax, Receiving data
Status check
You can check the current divert
status for all conditions.
After a short pause, the current
situation is transmitted by the
network and displayed.
p Condition set.
o Not set.
s
Display if status is
unknown (e.g. with a new
SIM card).
Clear all b
All set diverts are cleared.
Fact. settings
Reset phone to default values
(factory setting).
File system
Format the file system (p. 51)
(Format) and delete (not Phonebook)
or defragment all stored data (Clean
up).
Phone identity
Display the phone identity number
(IMEI) and software version.
Auto off
The phone switches off each day at
the set time.
Clock
§Menu§ ¢ m ¢ Clock
¢ Select function.
Time/date
The clock must be set to the right
time once at start-up.
§Change§ First enter the date, then
the time.
Time zones
Set the time zone for where you
currently are .
Additional information
If the battery is removed for longer than
30 seconds, the clock must be reset.