Tap and hold using 2 fingers
● Open cycles line by line to change (without input screen
form)
Tap with two index fingers
● Tap with two fingers simultaneously in the lower right and
left-hand corners of the panel to open the TCU menu.
The menu has to be opened for service purposes.
Note
Flicking gestures with several fingers
The gestures only function reliably if you hold the fingers sufficiently far apart. The fingers
should be at least 1 cm apart.
Multitouch operation with SINUMERIK Operate
3.3 Operating with finger gestures
Smart machine tool operation
System Manual, 12/2017, 6FC5397-7FP40-0BA0 17
To Next Page
Loading...
Need help?
General
