Release management - eP-Satellite server
3.2 Installing the eP-Satellite server software
eP-Satellite server
36 Operating Instructions, 06/2009
Unzip the "Server_Install_Satellite_x.x.x.x.zip" archive. The installation package must be
located no more than one level below the drive letter; otherwise, installation problems
relating to the depth of the directory will arise. It must be ensured that none of the extracted
files including subfolders has read-only access.
Example: C:\temp\server_install_x.x.x.x
You must ensure that the unzipped installation package contains an adapted settings file
(under \tools\install). Following this, you need to run "install satellite_install.cmd".
Enter the following directory paths and confirm the queries as indicated in the table below:
Query Input
Install ePS Trigger Agent YES
Installationspfad %Installpath%\ePS_Services\Services\Version4
Database for logging %Database\(Instance)%
Create directories YES
Load assemblys to GAC YES
Installing language packages
Unzip Server_install_Ing_yy_x.x.x.x.cab (yy = language code for the relevant language).
Run setup_install_languages.bat under \tools\install\ in each unzipped package.
Installation path %Installpath%\ePS_Services\Services\Version4
Load assemblies to GAC YES
This exact procedure must be followed for all language packages. It is possible to do this for
more than one package at the same time. Once you have completed this process, you
should be able to see folders with each of the relevant language codes in the following
directory: %Installpath%\ePS_Services\Services\Version4\PC\bin
Installing MatLab
The operator must supply the MatLab component. The following steps must be carried out:
1. Install MatLab 2007a with MatLab Compiler on any Windows PC.
2. Once it has been successfully installed in directory
C:\Program Files\MATLAB\R2007a\toolbox\compiler\deploy\win32
copy file MCRInstaller.exe to the web server.
3. Close all service consoles (MMC services).
4. Run the copy of the MCRInstaller.exe file and install it with the settings below.
Installation path %Installpath%\ePS_Services\AppServer_V4\matlabruntime76
Language English
Restart the system.
To Next Page
Loading...
Need help?
General
