Siemens MCP 398C Operating Instructions

Release management - Updating the eP-Satellite server
5.4 BC run of version 4.7.0 on version 4.7.1
eP-Satellite server
Operating Instructions, 06/2009
95
Once the online Business Converter has finished, you can move on to the next installation
step.
Locking organizations
Since the Business Converter call "/ALLOFFLINE" temporarily unlocks all locked
organizations, these organizations need to be locked again. The call looks like this:
Command line:
ePS.Business.Converter.exe
/RESETTEMPORARILYUNLOCKEDORGANIZATIONS
Additional settings in the web.config file
The following settings can be made in file web.config of folder
C:\eps_services\Services\Version4:
<add key="zipBigStoreData" value="true"/>
If this parameter is set to true" (default setting), this means that newly uploaded data on the
web server will be compressed before it is stored in the database. If it is set to "false" the
data will be stored without being compressed.
While the BC is running, the following entry can be used to reactivate the old display for the
NC monitors:
Command line:
<condMon>
<NcMonitor configEnabled="false" timeseriesValuesEnabled="true">
</NcMonitor>
</condMon>

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English