Siemens NCU 7x0.3 PN Series

To Next Page

To Previous Page

Connectable components

9.1 NX10.3 / NX15.3

NCU 7x0.3 PN

Manual, 09/2011, 6FC5397-1EP40-0BA0

Type plate

The NX module type plate contains the following basic information:

&RPSRQHQWQDPH

2UGHUQXPEHU

,'QXPEHU

+:YHUVLRQ

6HULDOQXPEHU

Figure 9-2 Type plate using the NX10.3 as example

Note

You might need to access the information provided on the side-mounted type plate after the

equipment has been mounted. Since the type plate is located on the right-hand side of the

housing, which is the side typically used to connect to the SINAMICS S120 module, we

recommend that you make a note of the serial number of the NX prior to assembly.

Siemens NCU 7x0.3 PN Series - Page 83