Siemens OpenStage 80 SIP Operating Manual

Step by Step
Enhanced phone functions
106
Select and confirm the option shown.
Select and confirm the option shown.
j Specify a value and confirm your entry.
Select and confirm the option shown.
Allowing "Busy When Dialling"
If you activate this function, an incoming call received
while you are performing dialing is rejected. The caller
then hears the busy signal.
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
Outgoing calls
Autodial delay
Save & exit
Automatic dial delay does not work if you are
using a dial plan and Immediate dialing is confi-
gured (see Æ page 63). The number is automati-
cally dialed as soon as the string entered mat-
ches an entry in the dial plan.
User
Configuration
Outgoing calls
Busy when dialing
Yes
Save & exit
This setup option can also be found under "Han-
dling" in the "Incoming calls" menu.

Siemens OpenStage 80 SIP Specifications

General

Brand	Siemens
Model	OpenStage 80 SIP
Category	IP Phone
Language	English