Programmable sensor keys
81
Step by Step
Programming sensor keys
Initiating programming
Directly via a sensor key
S Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed..
Confirm to begin programming. The sensor key illumi-
nates continuously.
or Via the user menu
You can also program keys via the user menu.
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted
to press the key you wish to program.
S Press the sensor key you want to program with a func-
tion. The sensor key illuminates continuously.
If the prompt is not displayed or a programmed
function is not executed, then you can only
launch key programming via the user menu (ask
your service personnel about the current set-
ting).
OK
User
Phone
Program keys
To Next Page
Loading...
Need help?
General