Siemens OpenStage 80 SIP Operating Manual

Enhanced phone functions
89
Step by Step
Permitting call deflection
z
You can also configure this setting via the Web interface
Æ page 230.
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
j Enter and confirm the phone number to which the sta-
tion should be deflected.
or Deflecting to a DSS number
A call can be deflected to a direct station selection
(DSS) subscriber using the DSS key, if the key is config-
ured and the deflect function is activated by your ser-
vice personnel Æ page 122.
Information only, as set by service personnel: Yes or No.
User
Configuration
Incoming calls
Deflect
Allow deflection
Yes
Default destination
Entering a destination phone number is not man-
datory when call deflection is active. If you want
to deflect a call, you are prompted to enter a des-
tination phone number if there is none stored.
Deflect to DSS Yes

Siemens OpenStage 80 SIP Specifications

General

Brand	Siemens
Model	OpenStage 80 SIP
Category	IP Phone
Language	English