Siemens PAD-5-CLSA - Technical Data

Model PAD-5-CLSA
1
Technical Data
19
Siemens Industry, Inc.
A6V101030359_en--_c
Building Technologies Division
4.5 Technical Data
Supply input Operating voltage DC 26 V nominal, filtered
DC 3.3V nominal, filtered
Operating current (standby) 55mA
Max. operating current. 6.0 A
NAC circuit Plug strip X300, X400
Voltage DC 24 V
Special Application for strobe loads
Regulated for non-pulsing loads
Standby operating current Max. 10 mA
Active operating current
3 A (for a class A circuit or per class B
circuit)
Regulated current rating 0.3 A
Releasing circuit Voltage DC 24 V
Active operating current 3 A (for a class A circuit or per class B
circuit)
NAC circuit configured
as a Input Shorting
Device
Voltage DC 24V
Current < 10 mA
Line Impedance Max. circuit resistance 1.6 Ω @ 3.0 A
Supervised for  Open circuit
 Short circuit
 Ground fault
Design  Short-circuit protection
 Voltage surge protection
 Power limited

AUX output X300, X400
Voltage DC 24 V
Special Application
Active operating Current 3A
Cable types All (twisted recommended)
For detailed specifications refer to the
following documents:
 A6V10315013 for Desigo
 A6V10333396 for Cerberus PRO