Siemens PAD-5-CLSA - Wiring and Configuration; Wiring and Configuring the PAD-5-CLSA

Model PAD-5-CLSA
1
Wiring and Configuring the PAD-5-CLSA
9
Siemens Industry, Inc.
A6V101030359_en--_c
Building Technologies Division
Knockout Locations
A. Non-Power Limited - High Voltage (AC power)
B. Power Limited
C. Power Limited
D. Power Limited
E. Power Limited
3 Wiring the PAD-5-CLSA
3.1 Wiring and Configuring the PAD-5-CLSA
The chart below identifies the relevant elements and their location on the PAD-5-
CLSA. The diagram below is used to locate important parts of the board.
Figure 4: Component Location