Need help?Do you have a question about the Siemens POL955 and is the answer not in the manual?
General| Product type | Programmable Logic Controller (PLC) |
|---|---|
| Input Voltage | 24V DC |
| Protection Class | IP20 |
| Digital Inputs | 8 |
| Digital Outputs | 8 |
| Analog Outputs | 2 |
| Communication Interface | PROFIBUS |
| Operating Temperature | 0°C to +55°C |
Outlines critical safety regulations and requirements for installation and operation.
Details the specifications and connections of the primary control unit.
Explains how to set and display various operating modes and prioritize them.
Covers fan configuration, operating modes, and control strategies.
Outlines temperature control parameters, setpoints, and deviation alarms.
Details the configuration and management of alarm outputs.
Details manual operation, reliability, special settings, and priority arrays for analog outputs.
Covers manual operation, reliability, special settings, and priority arrays for digital outputs.
Explains present value, reliability, special settings, and priority arrays for analog inputs.
Covers present value, reliability, special settings, and alarm configurations for digital inputs.
Details parameters for PID controllers including gain, action times, and service modes.
Outlines parameters for cascade controllers, including setpoint selection and fault handling.
Covers internal and external Modbus interfaces, commissioning, and parameterization.
Explains BACnet/IP module commissioning, parameterization, and settings.
Explains backing up and loading plant configurations via SD card and controller.
Explains the system's access levels and password protection for various user roles.
Explains how to access and interpret diagnostic information, cycle times, and software versions.
Details how to use the SD card for downloading applications, configurations, and uploading parameters.
Explains the modem interface for remote service, sending alarm SMS, and commissioning the function.
Covers initial plant setup, including extension modules, fire alarms, filter alarms, and TSP functions.
Details subfunctions for plants, including night cooling, boost, damper control, and fan control settings.
Provides a function to check for unassigned or duplicate I/Os and identify unused points.
Guides users through the configuration process, including download and HMI config options.
Details the general settings for Configuration 1, including extension modules, alarms, and TSP functions.
Maps hardware assignments to functions for temperatures, pressures, flows, humidity, digital inputs/outputs, and alarms.
To Next Page