MAINTENANCE | 127
4) In the following dialog box, select the configuration files:
5) To open a navigation window, press the "XML Upload" softkey.
6) Select the files of the machine identity that you wish to transfer to EUNA.
7) Now confirm using the softkey "Upload file ..."
8) After the upload, other files can also be uploaded.
During the upload, the files are checked and a log is displayed for each file that has
been transferred.
9) If no other files are to be uploaded, press the softkey "continue >".
10) Complete the upload by pressing the "Save" softkey.
Note
Contact persons worldwide
If it was not possible to transfer the file, then please contact your local Siemens
Office Contact (http://www.automation.siemens.com/partner) in sales
To Next Page
Loading...
