Siemens PUMA V8300/M - 1. M Function

PROGRAMMING | 81
Part 3 PROGRAMMING
1. M Function
1.1 M Code List
M codes are also called the miscellaneous functions.
The M codes described in this chapter are generic ones and all of them are not usable by all
machine models. There are also cases that the function of the M code stated below has
different function on specific models. For details, refer to the ladder diagram supplied with
your machine or contact Doosan.
☆ : Option
○ : Standard
No.
DESCRIPTION
2A
type
M
type
Remark
M00
Program stop
○
○
M01
Optional stop
○
○
M02
Program end
○
○
M03
Spindle forward
(Main / Rev. )
○
○
M04
Spindle reverse
(Main / Rev. )
○
○
M05
Spindle stop
(Main / Rev. )
○
○
M06
M07
High pressure coolant
(cooljet) on
☆
☆
M08
Coolant on
○
○
M09
Coolant off
○
○
M10
M11
M12
M13
M14
Main chuck air blow on
☆
☆
M15
Main chuck air blow off
☆
☆
M16
M17
M18
M19
Main spindle orientation
○
○
M20
Loader call
☆
☆
M21
M22