Technical Instructions Q-Series Outdoor Air and Critical Environment
Document Number 155-755 Relative Humidity and Relative Humidity & Temperature Sensors
February 28, 2013
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2013 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to SBT_technical.editor.us.sbt@siemens.com
Dimensions,
Continued
Figure 6. QFA31 Series Dimensions in Inches (Millimeters).
Figure 7. QFA41 Series Sensors Dimensions in Inches (Millimeters).
Document No. 155-755
Printed in the USA
Page 8
To Previous Page
Loading...
