Siemens RDF301 Basic Documentation

Siemens
RDF301, RDF301.50..., RDF600KN
Building Technologies
„
Presence
detector via
bus (on
RDF600KN
1)
„
Operating mode button
„
Operating mode via bus
„
Temporary extended
Comfort mode via
operating mode button
„
Time schedule via bus
1)
If a time schedule
Timer
mode
Comfort
The display shows the Auto Timer mode symbol
effective room
By pressing the operating mode button, you can change to another operating
mode.
Automatic
Each time the time schedule sends a new operating mode (switching event), the
operating mode of the thermostat is set back to Auto
that the room temperature is maintained according to the time schedule.
If the time
either into
No intervention is possible neither by the user nor by an operating mode switch
over contact,
display w
The operating mode can be selected
The behavior of the operating mode
parameter P
P02 Without time
schedule
With time
dule via
1 ⇓
⇓
2 ⇓⇓
⇓
Auto Timer mode
with time schedule via
bus
Behavior when bus
sends new operating
mode
Pre-Comfort via bus
Behavior when bus
sends Protection
Availability of Economy
mode
RDF301, RDF301.50..., RDF600KN
, RDF600KN/S Basic D
ocumentation
detector via
RDF600KN
…)
"Presence detector" sent via bus has the same effect as the
local presence detector.
Operating mode button
The user can switch the operating mode using the operating
mode button.
Operating mode via bus
The operating mode can be changed via bus
Temporary extended
Comfort mode via
operating mode button
The operating mode can be
temporarily set from Economy to
Comfort by pressing the operating mode button, if...
– Economy was sent via bus
–
extended Comfort period >0 (parameter P68)
The last intervention wins, either locally or via bus
Time schedule via bus
The operating mode sent via bus can be overridden by all other
interventions.
Exception: Protection mode has priority 2
Note: If the time schedule switches from Comfort to Economy,
but the presence detector is still active (room occupied), the
thermostat
continues to work in Comfort mode for the period of
occupancy.
RDF600KN SW version < V1.8
works like RDF301… with the operating
mode switchover contact as window contact or
presence detector
If a time schedule
via bus is present, e.g. from central
control unit
mode
is active. The thermostat
automatically changes
Comfort
and Auto Economy according to the
time schedule via bus.
The display shows the Auto Timer mode symbol
along with the symbol for the
effective room
operating mode (Auto Comfort or
Auto
By pressing the operating mode button, you can change to another operating
Automatic
fan is the default f
an speed in Auto Timer mode.
Each time the time schedule sends a new operating mode (switching event), the
operating mode of the thermostat is set back to Auto
T
imer mode. This
that the room temperature is maintained according to the time schedule.
If the time
schedule sends Pre-Comfort mode
, then this mode will be transformed
either into
Economy (factory setting) or Comfort (
selectable
No intervention is possible neither by the user nor by an operating mode switch
over contact,
i
f Protection mode is set by the time sched
display w
hen the user presses a button.
The operating mode can be selected
locally via the operating mode button.
The behavior of the operating mode
button
(user profile)
parameter P
02, factory setting is P02 = 1.
With time
sche-
dule via
bus
Description
∂ Switching manually between 2
available (factory setting).
∂ Suited for hotel guest rooms
or commercial buildings.
∂ If a time schedule via bus
is available, then the Comfort
mode can be temporarily extended (see
⇓⇓
∂ Switching manually between 3
∂
Suited for homes and rooms where manual switching to
17 / 94
ocumentation
CE1P3171en
2017-12-07
"Presence detector" sent via bus has the same effect as the
The user can switch the operating mode using the operating
The operating mode can be changed via bus
.
temporarily set from Economy to
Comfort by pressing the operating mode button, if...
extended Comfort period >0 (parameter P68)
The last intervention wins, either locally or via bus
.
The operating mode sent via bus can be overridden by all other
Exception: Protection mode has priority 2
.
Note: If the time schedule switches from Comfort to Economy,
but the presence detector is still active (room occupied), the
continues to work in Comfort mode for the period of
works like RDF301… with the operating
presence detector
.
control unit
, then the Auto
automatically changes
between Auto
time schedule via bus.
along with the symbol for the
Auto
Economy ).
By pressing the operating mode button, you can change to another operating
an speed in Auto Timer mode.
Each time the time schedule sends a new operating mode (switching event), the
imer mode. This
is to assure
that the room temperature is maintained according to the time schedule.
, then this mode will be transformed
selectable
via parameter P88).
No intervention is possible neither by the user nor by an operating mode switch
-
f Protection mode is set by the time sched
ule. OFF flashes on the
locally via the operating mode button.
(user profile)
can be defined via
modes, Economy is not
or commercial buildings.
is available, then the Comfort
mode can be temporarily extended (see
below).
modes.
Suited for homes and rooms where manual switching to

Siemens RDF301 Specifications

General

Brand	Siemens
Model	RDF301
Category	Thermostat
Language	English