Siemens RDG2 KN Series Basic Documentation

Supported KNX tools
ACS tool
5
A6V11545892_en--_c
153 | 180
Plant type
Application
configuration
Application
configuration
4-pipe fan coil unit with PICV and 6-port
control ball valve as changeover
– Fan operation: Must be enabled
(P350 <> 0)
H/C ceiling with PICV and 6-port control
ball valve as changeover
– Fan operation: Disabled (P350 = 0)
H/C ceiling with 6-port control ball valve
– Fan operation: Disabled (P350 = 0)
2-pipe/2-
stage
heating or
cooling
2-pipe/2-stage fan coil unit
– Control sequence: No impact
(P001 = any)
– Fan operation: Enabled (P350 <> 0)
2-pipe/2-stage
– Control sequence: No impact (P001 = any)
– Fan operation: Disabled (P350 = 0)
2-pipe/2-stage fan coil unit
– Control sequence: No impact
(P001 = any)
– Fan operation: 2
nd
stage (P350 = 4)
2-pipe/2-stage
– Control sequence: No impact (P001 = any)
– Fan operation: 2
nd
stage (P350 = 5)
4-pipe with
electric
heater
4-pipe fan coil unit with electric heater
– Control sequence: Not auto c/o
(P001 > 2)
– Fan operation: Enabled (P350 <> 0)
1 stage Heat and Cool with electric heater
– Control sequence: No impact (P001 <> 2)
– Fan operation: Disabled (P350 = 0)
4-pipe/
2-stage
4-pipe/2-stage fan coil unit
– Control sequence: Not auto c/o
(P001 > 2)
– Fan operation: Enabled (P350 <> 0)
4-pipe/2-stage
– Control sequence: Not auto c/o (P001 > 2)
– Fan operation: Disabled (P350 = 0)

Siemens RDG2 KN Series Specifications

General

Brand	Siemens
Model	RDG2 KN Series
Category	Thermostat
Language	English