Siemens RUGGEDCOM RX1510 - Failsafe Relay Specifications; Operating Environment; Mechanical Specifications

Chapter 4
Technical Specifications
RUGGEDCOM RX1510
Installation Guide
32 Failsafe Relay Specifications
Section4.2
Failsafe Relay Specifications
Maximum Switching Voltage Rated Switching Current Isolation
30 VDC 5 A
250 VAC 6.25 A
2800 VDC for 1 minute
Section4.3
Operating Environment
The RUGGEDCOM RX1510 is rated to operate under the following environmental conditions.
IMPORTANT!
Temperature limits for select line modules may differ from that which can be withstood by the
RUGGEDCOM RX1510. Make sure the selected modules are rated for the expected environmental
conditions before deployment. For more information, refer to the RUGGEDCOM RX1510 Series Modules
Catalog.
Parameter Range Comments
Ambient Operating Temperature -40 to 85 °C
(-40 to 185 °F)
d
Measured from a 30 cm (12 in) radius surrounding the center of the
enclosure.
Ambient Relative Humidity 5% to 95% Non-condensing
Ambient Storage Temperature -40 to 85 °C
(-40 to 185 °F)
d
Maximum ambient operating temperature is 70 °C (158 °F) when the device is installed along with Underwriter Laboratories (UL) listed devices.
Section4.4
Mechanical Specifications
Dimensions Refer to Chapter5, Dimension Drawings
Weight Approximately 5.0 kg (11 lb)
Ingress Protection IP40
Enclosure Aluminum