Siemens S7-1200 - Page 123

Approvals
CP 1243-7 LTE
Operating Instructions, 01/2015, C79000-G8976-C381-01
123
RoHS
The CP meets the requirements of the EU directive 2011/65/EC on the restriction of the use
of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581:2012
cULus
Underwriters Laboratories Inc. meets
● Underwriters Laboratories, Inc.: UL 508 Listed (industrial control devices)
● Canadian Standards Association: CSA C22.2 No. 142 (process control equipment)
cULus HAZ.LOC.
Underwriters Laboratories Inc. meets
● UL 1604 (Hazardous Location)
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4A; Ta = -20 °C...60 °C
● Cl. 1, Zone 2, GP. IIC T4; Ta = -20 °C...60 °C
FM
Factory Mutual Research (FM)
Approval Standard Class number 3600 and 3611
Approved for use in:
Class I, Division 2, Group A, B, C, D, Temperature Class T4A, Ta = 60 °C
Class I, Zone 2, Group IIC, Temperature Class T4, Ta = 60 °C
C-Tick
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
National approvals
You will find an overview of the country-specific wireless approvals of SIMATIC NET devices
with GSM or UMTS services on the Internet pages of Siemens Automation Customer
Support. You will find the link to the document on the following page:
(www.siemens.com/simatic-net/ik-info)