Approvals
CP 443-1 Advanced
98 Equipment Manual, 03/2023, C79000-G8976-C256-07
• 2014/30/EU (EMC)
EMC directive of the European Parliament and of the Council of 26 February 2014 on the
approximation of the laws of the member states relating to electromagnetic compatibility;
official journal of the EU L96, 29/03/2014, pages 79-106
• 2011/65/EU (RoHS)
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment
UK Declaration of Conformity
Importer UK:
Siemens plc
Sir William Siemens House
Princess Road
Manchester
M20 2UR
The product meets the requirements of the following regulations:
• UKEX Regulations
SI 2016/1107 The Equipment and Protective Systems Intended for Use in Potentially
Explosive Atmospheres Regulations 2016, and related amendments
• EMC Regulations
SI 2016/1091 The Electromagnetic Compatibility Regulations 2016
• RoHS Regulations
SI 2012/3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
ATEX / IECEx / UKEX / CCC-Ex
Note the information in the document "Use of subassemblies/modules in a Zone 2 Hazardous
Area", which you will find on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
The conditions must be met for safe usage of the CP according to the section Notes on use in
hazardous areas according to ATEX / UKEX / IECEx / CCC-Ex (Page 41).
The product meets the explosion protection requirements outlined below.
IECEx
Classification: Ex ec IIC T4 Gc, Certificate no.: DEK 18.0019X
The product meets the requirements of the standards:
• IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• IEC 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
To Next Page
Loading...
