Siemens S7-400 - Attaching a Module Assembly Comprising CPU and Expansion Modules and Swinging It into Position

Assembling the M7-400
8-25
S7-400 and M7-400 Programmable Controllers Hardware and Installation
A5E00069481-04
Attaching the Module Assembly
Attach the module assembly (1) and swing it downwards (2). Figure 8-12 shows
how to attach a module assembly onto a rack and swing it into position.
Note
Do not push the module assembly down whilst swinging it into position.
1
2
Figure 8-12 Attaching a Module Assembly Comprising CPU and Expansion Modules and Swinging it into
Position