Siemens S75 - Conference

Calling34
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (34) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
• Accept the waiting call in addition to
the first
§Toggle§ Accept the waiting call
and place the current call
on hold.
Always proceed as above to swap be-
tween the two calls.
• Reject the waiting call
§Reject§ Press.
Or
§Forward§ The waiting call is divert-
ed, for example,
to mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
ð
Accept the new call.
End call(s)
B
Press briefly.
After the Return to held call? display,
you have the following choice:
§Yes§ You accept the call on
hold.
§No§ You end the second call
too.
Conference b
You can call up to 5 conference par-
ticipants one after the other and
then link them together in a confer-
ence call. Some of the functions de-
scribed may not be supported by
your service provider or may have to
be enabled specially.
A connection has already been
established:
§Options§ Open menu and select
Hold. The current connec-
tion is maintained.
H
/
J
Select phone number
from Contacts or enter it
manually.
When the new connec-
tion is established …
§Options§ … open the menu and se-
lect Conference. The held
call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
Ending
B
All calls in the conference
finish simultaneously
when the End key is
pressed.