85Settings
right page (85) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings
Call setup
C
¢T¢Call setup
¢Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Forward
Select the condition under which
calls should be diverted to your mail-
box or another phone number. To
set diversion:
I
Select condition,
e.g. Unanswered.
ñ
Confirm change, then
select Set.
J
Enter phone number.
§Options§ Open, then select Save.
All calls
All calls are diverted.
Ç
Symbol in the top line of
display in standby mode.
Unanswered
b
Includes the conditions Not reachable,
No reply, Busy, see below.
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated, you will hear
the call waiting tone during a call.
Receiving fax
b
Fax calls are diverted to a number
with a fax connection.
Receiving data
b
Data calls are diverted to a phone
number with a PC connection.
To Next Page
Loading...
