Description of the device
3.6 Reset button
SCALANCE W760/W720
Operating Instructions, 07/2020, C79000-G8976-C322-12
23
3.6 Reset button
The reset button (position ①) is on the front of the housing:
Functions of the reset button
The reset button has the following functions:
●
Restart of the device
To restart the device, press the reset button briefly.
Note
If you make changes to the configuration and restart
immediately afterwards with the
set button, the changes may be lost. If you restart the device using the WBM (menu
command "System > Restart") or using the CLI (command "restart" in the Privileged
EXEC Modus), the configuration changes are always retaine
d.
Upkeep and maintenance
●
Loading new firmware
If the "Load & Save" menu command of Web Based Management is unsuccessful, the
reset button can be used to load new firmware. This situation can occur if there is a
power outage during the normal firmware update. You will find further information in the
configuration manual in Downloading new firmware using TFTP without WBM and CLI
(Page 40).
To Next Page
Loading...
Need help?
General
