{
<interface-type><interface-list>|
vlan<vlan-id(1-4094)>
}|
ssh|ssl|acl|ip|snmp|sntp|http|locked-port|
auto-logout|time|
ntp|auto-save|wlan|events|nat|radius|umac
}][all]
The parameters have the following meaning:
Parameter Description Range of values / note
syslog Shows the configuration settings of the Syslog
function
-
dhcp shows the configuration settings of the Dynamic
Host Configuration Protocol
-
qos shows the configuration settings of QoS (Quality
of Service)
-
stp shows the configuration settings of the Spanning
Tree Protocol
-
vlan Keyword for a VLAN connection -
vlan-id Number of the addressed VLAN 1 ... 4094
interface Shows that an interface description follows -
interface-
type
Type or speed of the interface Enter a valid interface.
interface-
list
Module no. and port no. of the interface
ssh Shows the configuration settings of the Secure
Shell protocol
-
ssl Shows the configuration settings of the Secure
Sockets Layer protocol
-
acl Shows the configuration settings of the access
control list
-
ip Shows the configuration settings of the Internet
Protocol
-
snmp Shows the configuration settings of the Simple
Network Management Protocol
-
sntp Shows the configuration settings of the Simple
Network Time Protocol
-
http Shows the configuration settings of the Hyper‐
text Transfer Protocol
-
locked-port Shows the configuration settings of the locked
port function.
auto-logout Shows the configuration settings of the auto log‐
out function
-
time Shows the configuration settings of the system
time
-
ntp Shows the configuration settings of the Network
Time Protocol
-
Configuration
4.4 Configuration Save & Restore
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
102 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
