Siemens SCALANCE W788 User Manual

Security recommendations
SCALANCE W788-x / W748-1
10 Operating Instructions, 09/2017, A5E03678333-12
●
Factory setting
– Open
The factory setting of the port is "Open".
– Closed
The factory setting of the port is "Closed".
●
Authentication
Specifies whether or not the protocol is authenticated.
Protocol
Port number
Port status
Factory setting
of the port
Authentication
SSH
TCP/22
Open (when configured)
Open
Yes
TELNET
TCP/23 Open (when configured) Open Yes
HTTP
TCP/80
Open (when configured)
Open
Yes
HTTPS
TCP/443 Open (when configured) Open Yes
SNTP
NTP
UDP/123 Open (when configured) Closed No
SNMP
UDP/161
Open (when configured)
Open
Yes
PROFINET
UDP/34964,
UDP/49154,
49155
Open Open No
Syslog
UDP/514
Open (when configured)
Open
No
EtherNet/IP
TCP/44818,
UDP/2222,4
4818
Open (when configured) Open No
DHCP
UDP/67,68
Open (when configured)
Closed
No
RADIUS
UDP/1812,1
813
Open (when configured) Closed No
TFTP
UDP/69
Open (when configured)
Closed
No

Siemens SCALANCE W788 Specifications

General

Brand	Siemens
Model	SCALANCE W788
Category	Wireless Access Point
Language	English