Siemens SCALANCE W788 User Manual

Technical specifications
7.2 Technical specifications of the SCALANCE W7x8-2)
SCALANCE W788-x / W748-1
60 Operating Instructions, 09/2017, A5E03678333-12
7.2
Technical specifications of the SCALANCE W7x8-2)
The following technical specifications apply to the following devices:
● SCALANCE W788-2 RJ45
● SCALANCE W788-2 M12
● SCALANCE W788-2 M12 EEC
Note
Bridging a power outage is possible only with an input voltage of 24 VDC (
-15% to +20%).
Note
You will find detailed infor
mation on the transmit power and receiver sensitivity in the
document "Leistungsdaten 802.11abgn PCIe Minicard / Characteristics 802.11abgn PCIe
Minicard" (REF_W700
-RadioInterface.pdf).
Technical specifications
Data transfer
Ethernet transfer rate
10 / 100 / 1000 Mbps
Wireless transmission rate
1 ... 450 Mbps
Wireless standards supported IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11h
IEEE 802.11n
Power supply standards supported Type IEEE 802.3at type 1 (802.3af)
IEEE 802.3at type 2 (Power over Ethernet)
Class
Class 4
Attachment to Industrial Ethernet
RJ-45 variants Quantity 1
Design RJ-45 jack
Properties Half duplex/full duplex, autocrossover,
autonegotiation, autosensing, PoE, floating
M12 variants
Quantity
1
Design
M12 socket
Properties Half duplex/full duplex, autocrossover,
autonegotiation, autosensing, PoE, floating
Permitted cable lengths (Ethernet)
(Alternative combinations per length range)
IE TP torsion cable 0 ... 55 m
0 ... 45 m + 10 m TP cord

Siemens SCALANCE W788 Specifications

General

Brand	Siemens
Model	SCALANCE W788
Category	Wireless Access Point
Language	English