Description of the device
3.5 LED display
SCALANCE W788-x / W748-1
24 Operating Instructions, 09/2017, A5E03678333-12
Note
Primary user (radar) on all enabled channels
If the device detects a primary user (for example radar signals) on all enabled channels of
WLAN interface 1, the LEDs F
flash. No data traffic is then possible for the next
30 minutes. After this time, the device runs the scan a
gain and checks whether a primary
user still exists. If no primary user is detected, data traffic is possible again.
The wait time of 30 minutes is necessary due to legal requirements and cannot be shortened
even by restarting the device.
To Next Page
Loading...
Need help?
General
