Siemens SCALANCE X-100 - The Switch Configuration (Port Mirroring) WBM Menu; The Switch Ports Status WBM Menu

Diagnostics over Industrial Ethernet
6.2 Web Based Management (WBM)
6.2.4.17 The "Switch Configuration (Port Mirroring)" WBM Menu
Port Mirroring
With this dialog, you can enable or disable port mirroring; in other words, mirroring the data
traffic from the mirror port to the monitor port.
Apart from the device be monitored, no other communication node should be connected to
the monitor port.
Figure 6-22 "Switch Configuration" Dialog
Mirroring Port Text Box
Under mirrored port, enter the port to be monitored.
Monitor Port Text Box
Under monitor port, enter the port that will do the monitoring.
You apply your settings with Set Value.
6.2.4.18 The "Switch Ports Status" WBM Menu
Switch Ports Status
This dialog informs you about the current status of the ports.
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
6-26 Commissioning Manual, 1,