Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
193
VLAN Learning
Learning MAC addresses in VLANs
On this page, you can configure the "Learn to all VLANs" option for each port.
Figure 4-81 Learn to all VLANs Config Mask
Enable learn to all VLANs
If you enable the option for a port, a MAC address received at the port is automatically
learned in all configured VLANs.
Syntax of the Command Line Interface
Table 4- 59 Learn to all VLANs - CLI\SWITCH\VLAN\PORTS>
lrnallv [<E|D> [Ports]] Enables/disables the automatic learning of a MAC address in all configured
Administrator only.
To Next Page
Loading...
