Approvals, certificates, standards
9.6 Product group X-300M PoE
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
255
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
●
(shocks during operation)
Test parameters:
15 g , 11 ms duration
6 shocks per axis
●
(vibrations during transportation)
Test parameters:
10 – 58 Hz: 0.075 mm
85 – 150 Hz: 1 g
1 octave/min, 20 sweeps
Product group X-300M PoE
9.6.1
X-300M PoE approvals, certificates
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is
printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
Note
Shipbuilding approval
You will find
shipbuilding approvals on the Internet on the pages of Siemens Industry
Automation Customer Support under the following entry ID:
http://support.automation.siemens.com/WW/view/en/33118441)
"Entry list" tab > entry type "Certificates"
SIMATIC NET products meet the requirements and aims of the following EC directives.
To Next Page
Loading...
Need help?
General