ATEX, IECEx, UKEX and CCC Ex certication
WARNING
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous Area".
You will nd this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support (https://
support.industry.siemens.com/cs/ww/en/view/78381013).
Enter the document identication number "C234" as the search term.
The markings of the electrical devices are:
II 3 G Ex ec IIC T4 Gc
DEKRA 18ATEX0025 X
DEKRA 21UKEX0001 X
IECEx DEK 18.0017X
Importer UK:
Siemens plc,
Manchester
M20 2UR
(Ex na IIC T4 Gc, not on the nameplate)
2020322310002626
2020322310002915
2020322310002987
The products meet the requirements of the following standards:
• EN/IEC 60079-7, GB 3836.8
• EN IEC/IEC 60079-0, GB 3836.1
You will nd the current versions of the standards in the currently valid certicates.
Approvals
SCALANCE XB-000
Operating Instructions, 01/2022, A2B00077300-11 93
To Next Page
Loading...
