Siemens SED2 Application Guide

27 / 44
Siemens Application Guide «Fire Mode» CM1A5192en_01
Building Technologies Commissioning Wizard for Essential Service Mode 23.10.2007
5.2 Parameterisation of ESM function
This example shown is equivalent to example 2 in Chapter 4.2 – Application Ex-
ample 2.
Following windows will show up, to make life as easy as possible:
1
2
Note
If the user clicks
«No» it will take him
back to the start.
3
4

Siemens SED2 Specifications

General

Input Voltage	380-480V AC
Current Rating	Depends on model
Control Type	Digital
Communication	PROFIBUS, PROFINET, Ethernet
Communication Interface	RS485
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Operating Temperature	0 to +45 °C
Storage Temperature	+70 °C