Siemens SICAM Q100 - Page 51

Communication
2.2 Modbus
51SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
0573 PQ_Sa_min Apparent power a VA
0575 PQ_Sb_min Apparent power b VA
0577 PQ_Sc_min Apparent power c VA
0579 PQ_S_min Apparent power VA
0581 PQ_cos (a)_min Active power factor a -
0583 PQ_cos (b)_min Active power factor b -
0585 PQ_cos (c)_min Active power factor c -
0587 PQ_cos _min Active power factor -
0589 PQ_PFa_min Power factor a -
0591 PQ_PFb_min Power factor b -
0593 PQ_PFc_min Power factor c -
0595 PQ_PF_min Power factor -
0597 PQ_a_min Phase angle a ° (degree)
0599 PQ_b_min Phase angle b ° (degree)
0601 PQ_c_min Phase angle c ° (degree)
0603 PQ__min Phase angle ° (degree)
0605 PQ_f_min Power frequency Hz
0607 PQ_U
2
_min Neg. seq. comp. V %
0609 PQ_I
2
_min Neg. seq. comp. I %
0611 PQ_U
0
_min Zero seq. comp. V %
0613 PQ_I
0
_min Zero seq. comp. I %
0615 PQ_Freq_10s_min Frequency
The period for calculating the power frequency is 10 s.
Hz
0617 PQ_THDS (Va)_min Voltage a THDS %
0619 PQ_THDS (Vb)_min Voltage b THDS %
0621 PQ_THDS (Vc)_min Voltage c THDS %
Table 2-26 Registers 0531 to 0644, 0779 to 0780, 0785 to 0786, and 16007 to 16012: PQ Measured
Values – Minimum Values (cont.)
Register Type of Information Remark Unit
SYS_SICAM_Q100_US.book Page 51 Thursday, September 24, 2020 1:17 PM