Siemens SICAM Q100 - Page 52

Communication
2.2 Modbus
52 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
0623 PQ_THDS (Ia)_min Current a THDS %
0625 PQ_THDS (Ib)_min Current b THDS %
0627 PQ_THDS (Ic)_min Current c THDS %
0629 PQ_Voltage
(12)_min
Angle Va-Vb ° (degree)
0631 PQ_Voltage
(31)_min
Angle Vc-Va ° (degree)
0633 PQ_Current
(12)_min
Angle Ia-Ib ° (degree)
0635 PQ_Current
(31)_min
Angle Ic-Ia ° (degree)
0637 PQ_Q1a_min Reactive power (A)_Fundamental var
0639 PQ_Q1b_min Reactive power (B)_Fundamental var
0641 PQ_Q1c_min Reactive power (C)_Fundamental var
0643 PQ_Q1_min Reactive power ()_Fundamental var
0779 PQ_Voltage
(23)_min
Angle Vb-Vc ° (degree)
0785 PQ_Current
(23)_min
Angle Ib-Ic ° (degree)
16007 PQ_THDS (Vab)_min Voltage ab THDS %
16009 PQ_THDS (Vbc)_min Voltage bc THDS %
16011 PQ_THDS (Vca)_min Voltage ca THDS %
Table 2-26 Registers 0531 to 0644, 0779 to 0780, 0785 to 0786, and 16007 to 16012: PQ Measured
Values – Minimum Values (cont.)
Register Type of Information Remark Unit
SYS_SICAM_Q100_US.book Page 52 Thursday, September 24, 2020 1:17 PM