Siemens SICAM Q100 - Page 55

Communication
2.2 Modbus
55SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
0743 PQ_THDS (Ia)_max Current a THDS %
0745 PQ_THDS (Ib)_max Current b THDS %
0747 PQ_THDS (Ic)_max Current c THDS %
0749 PQ_Voltage
(12)_max
Angle Va-Vb ° (degree)
0751 PQ_Voltage
(31)_max
Angle Vc-Va ° (degree)
0753 PQ_Current
(12)_max
Angle Ia-Ib ° (degree)
0755 PQ_Current
(31)_max
Angle Ic-Ia ° (degree)
0757 PQ_Q1a_max Reactive power (A)_Fundamental var
0759 PQ_Q1b_max Reactive power (B)_Fundamental var
0761 PQ_Q1c_max Reactive power (C)_Fundamental var
0763 PQ_Q1_max Reactive power ()_Fundamental var
0781 PQ_Voltage
(23)_max
Angle Vb-Vc ° (degree)
0787 PQ_Current
(23)_max
Angle Ib-Ic ° (degree)
16013 PQ_THDS
(Vab)_max
Voltage ab THDS %
16015 PQ_THDS
(Vbc)_max
Voltage bc THDS %
16017 PQ_THDS
(Vca)_max
Voltage ca THDS %
Table 2-27 Registers 0651 to 0764, 0781 to 0782, 0777 to 0788, and 16013 to 16018: PQ Measured
Values – Maximum Values (cont.)
Register Type of Information Remark Unit
SYS_SICAM_Q100_US.book Page 55 Thursday, September 24, 2020 1:17 PM