Siemens SICAM Q100 - Page 54

Communication
2.2 Modbus
54 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
0693 PQ_Sa_max Apparent power a VA
0695 PQ_Sb_max Apparent power b VA
0697 PQ_Sc_max Apparent power c VA
0699 PQ_S_max Apparent power VA
0701 PQ_cos (a)_max Active power factor a -
0703 PQ_cos (b)_max Active power factor b -
0705 PQ_cos (c)_max Active power factor c -
0707 PQ_cos _max Active power factor -
0709 PQ_PFa_max Power factor a -
0711 PQ_PFb_max Power factor b -
0713 PQ_PFc_max Power factor c -
0715 PQ_PF_max Power factor -
0717 PQ_a_max Phase angle a ° (degree)
0719 PQ_b_max Phase angle b ° (degree)
0721 PQ_c_max Phase angle c ° (degree)
0723 PQ__max Phase angle ° (degree)
0725 PQ_f_max Power frequency Hz
0727 PQ_U
2
_max Neg. seq. comp. V %
0729 PQ_I
2
_max Neg. seq. comp. I %
0731 PQ_U
0
_max Zero seq. comp. V %
0733 PQ_I
0
_max Zero seq. comp. I %
0735 PQ_Freq_10s_max Frequency
The period for calculating the power frequency is 10 s.
Hz
0737 PQ_THDS (Va)_max Voltage a THDS %
0739 PQ_THDS (Vb)_max Voltage b THDS %
0741 PQ_THDS (Vc)_max Voltage c THDS %
Table 2-27 Registers 0651 to 0764, 0781 to 0782, 0777 to 0788, and 16013 to 16018: PQ Measured
Values – Maximum Values (cont.)
Register Type of Information Remark Unit
SYS_SICAM_Q100_US.book Page 54 Thursday, September 24, 2020 1:17 PM