EasyManua.ls Logo

Siemens SICAM Q100 - Page 59

Siemens SICAM Q100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
2.2 Modbus
59SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
2.2.7.25 Registers 1001 to 1378: Harmonics - Voltage Values (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Calculation period: 10/12 cycle (50Hz/60Hz)
Network types: harmonic ph-n is available if 4-wire is used, and harmonic ph-ph is available if 3-wire is used.
Data type: Measured value
2.2.7.26 Registers 1379 to 1756: Harmonics - Current Values (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Calculation period: 10/12 cycle (50Hz/60Hz)
Data type: Measured value
Table 2-33 Registers 1001 to 1378: Harmonics - Voltage Values
Register Type of Information Remark Unit
1001 H_Va-1/H_Vab-1 Harmonic, voltage value, a-N, ab
(fundamental)
V
1003 to 1126 H_Va-x/H_Vab-x
(x = 2 to 63)
Harmonic, voltage value, a-N, ab
(2 bytes for each register)
V/%
1127 H_Vb-1/H_Vbc-1 Harmonic, voltage value, b-N, bc
(fundamental)
V
1129 to 1252 H_Vb-x/H_Vbc-x
(x = 2 to 63)
Harmonic, voltage value, b-N, bc
(2 bytes for each register)
V/%
1253 H_Vc-1/H_Vca-1 Harmonic, voltage value, c-N, ca
(fundamental)
V
1255 to
1378
H_Vc-x/H_Vca-x
(x = 2 to 63)
Harmonic, voltage value, a-N, ab
(2 bytes for each register)
V/%
Table 2-34 Registers 1379 to 1756: Harmonics - Current Values
Register Type of Information Remark Unit
1379 H_Ia-1 Harmonic, current value, a
(fundamental)
A
1381 to
1504
H_Ia-x
(x = 2 to 63)
Harmonic,current value, a
(2 bytes for each register)
A
1505 H_Ib-1 Harmonic, current value, b
(fundamental)
A
1507 to
1630
H_Ib-x
(x = 2 to 63)
Harmonic,current value, b
(2 bytes for each register)
A
SYS_SICAM_Q100_US.book Page 59 Thursday, September 24, 2020 1:17 PM

Other manuals for Siemens SICAM Q100

Related product manuals