EasyManua.ls Logo

Siemens SICAM Q100 - Page 58

Siemens SICAM Q100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
2.2 Modbus
58 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
2.2.7.24 Registers 0981 to 0988: Mains Signalling Voltage Evaluation (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Registers 0981 to 0984: C1/C of Mains Signalling Voltage Evaluation
Data type: Measured value
Registers 0985 to 0988: User Specified Frequency for Mains Signalling Voltage Evaluation
Data type: Measured value
0835 WQc_cap Reactive Energy, Capacitive, Phase C Pulse
0837 WQ_cap Reactive Energy, Capacitive Pulse
0839 WSa Apparent Energy, Phase A Pulse
0841 WSb Apparent Energy, Phase B Pulse
0843 WSc Apparent Energy, Phase C Pulse
0845 WS Apparent Energy Pulse
Table 2-30 Registers 0807 to 0846: Counter Pulses (cont.)
Register Type of Information Remark Unit
Table 2-31 Registers 0981 to 0984: C1/C of Mains Signalling Voltage Evaluation
Register Type of Information Remark Unit
0981 MSCR_Freq1 The C1/C*100% ratio of mains signalling
voltage evaluation on frequency 1
%
0983 MSCR_Freq2 The C1/C*100% ratio of mains signalling
voltage evaluation on frequency 2
%
Table 2-32 Registers 0985 to 0988: User Specified Frequency for Mains Signalling Voltage Evaluation
Register Type of Information Remark Unit
0985 MS_Freq1 User-specified frequency 1 for mains signal-
ling voltage evaluation
Hz
0987 MS_Freq2 User-specified frequency 2 for mains signal-
ling voltage evaluation
Hz
SYS_SICAM_Q100_US.book Page 58 Thursday, September 24, 2020 1:17 PM

Other manuals for Siemens SICAM Q100

Related product manuals