EasyManua.ls Logo

Siemens SICAM Q100 - Page 63

Siemens SICAM Q100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
2.2 Modbus
63SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
Registers 2909 to 2980: Tariff Counters Pulses
Data type: Measured value
The following table shows the counter pulses for the tariff 1 (2909 to 2926). The counter pulses of the other 3
tariffs (2927 to 2980) are in the same structure.
2.2.7.31 Registers 3001 to 3298: PQ Calculation for Maximum Harmonics - Current
Values (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
The data are calculated within the parameterized time (for example 30 s, 1 min etc.).
Data type: Measured value
Table 2-39 Register 2909 to 2926: Counters Pulses for Tariff 1
Register Type of Information Remark Unit
2909 WP_exp_tariff_1 Active Energy, Export, Tariff 1 Pulse
2911 WP_imp_tariff_1 Active Energy, Import, Tariff 1 Pulse
2913 WQ_ind_imp_tariff_1 Reactive Energy, Inductive, Import, Tariff 1 Pulse
2915 WQ_cap_exp_tariff_1 Reactive Energy, Capacitive, Export, Tariff 1 Pulse
2917 WQ_ind_exp_tariff_1 Reactive Energy, Inductive, Export, Tariff 1 Pulse
2919 WQ_cap_imp_tariff_1 Reactive Energy, Capacitive, Import, Tariff 1 Pulse
2921 WQ_ind_tariff_1 Reactive Energy, Inductive, Tariff 1 Pulse
2923 WQ_cap_tariff_1 Reactive Energy, Capacitive, Tariff 1 Pulse
2925 WS_tariff_1 Apparent Energy, Tariff 1 Pulse
Table 2-40 Registers 3001 to 3298: PQ Calculation for Maximum Harmonics - Current Values
Register Type of Information Remark Unit
3001 H_Ia-1_MAX
Harmonic (average value), current value, a
(Fundamental)
A
3003 to
3098
H_Ia-x_MAX
(x = 2 to 49)
Harmonic (average value), current value, a
(2 bytes for each register)
A
3101 H_Ib-1_MAX
Harmonic (average value), current value, b
(Fundamental)
A
3103 to
3198
H_Ib-x_MAX
(x = 2 to 49)
Harmonic (average value), current value, b
(2 bytes for each register)
A
SYS_SICAM_Q100_US.book Page 63 Thursday, September 24, 2020 1:17 PM

Other manuals for Siemens SICAM Q100

Related product manuals