EasyManua.ls Logo

Siemens SICAM Q100 - Page 65

Siemens SICAM Q100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
2.2 Modbus
65SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
2.2.7.33 Registers 4001 to 4378: Phase Angle of Harmonics - Voltage Values (Read
Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Calculation period: 10/12 cycle (50Hz/60Hz)
Network types: Only 1P2W, 3P4W_bal, 3P4W_unb_PN is available.
Data type: Measured value
2.2.7.34 Registers 4379 to 4756: Phase Angle of Harmonics - Current Values (Read
Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Calculation period: 10/12 cycle (50Hz/60Hz)
Network types: Only 1P2W, 3P4W_bal, 3P4W_unb_PN is available.
3445 WS_tariff_value_1 Apparent Energy, Tariff 1 VAh
Table 2-41 Registers 3301 to 3448: Values of Tariff 1
Register Type of Information Remark Unit
Table 2-42 Registers 4001 to 4378: Phase Angle of Harmonics - Voltage Values
Register Type of Information Remark Unit
4001 HP_Va-1
Harmonic (phase angle), voltage value, a-N
(fundamental)
° (degree)
4003 to
4126
HP_Va-x
(x = 2 to 63)
Harmonic (phase angle), voltage value, a-N
(2 bytes for each register)
° (degree)
4127 HP_Vb-1
Harmonic (phase angle), voltage value, b-N
(fundamental)
° (degree)
4129 to
4252
HP_Vb-x
(x = 2 to 63)
Harmonic (phase angle), voltage value, b-N
(2 bytes for each register)
° (degree)
4253 HP_Vc-1
Harmonic (phase angle), voltage value, c-N
(fundamental)
° (degree)
4255 to
4378
HP_Vc-x
(x = 2 to 63)
Harmonic (phase angle), voltage value, c-N
(2 bytes for each register)
° (degree)
SYS_SICAM_Q100_US.book Page 65 Thursday, September 24, 2020 1:17 PM

Other manuals for Siemens SICAM Q100

Related product manuals