EasyManua.ls Logo

Siemens SICAM Q100 - Page 68

Siemens SICAM Q100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
2.2 Modbus
68 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
2.2.7.38 Registers 5501 to 5691: Latest 10 RVC Events (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
Data type: Measured value + Date/time
The following table shows the information for the latest RVC event (5501 to 5511). The information of the other
9 RVC events (5521 to 5691) are in the same structure.
5405 to 5406 Voltage interrupt 1 V Minimum voltage value during interrupt 1
5407 to 5408 Voltage interrupt 1 time dura-
tion
s Interrupt 1 time duration
5409 Influenced phase - Related phases
bit 0: Va, bit 1: Vb, bit 2: Vc,
bit 3: Vab, bit 4: Vbc, bit 5: Vca
if any bit =1 means corresponding phase
is influenced
Table 2-46 Registers 5401 to 5409: The Latest Voltage Interrupt (cont.)
Register Type of Information Unit Remark
Table 2-47 Registers 5501 to 5511: The Latest RVC Events
Register Type of Information Unit Remark
5501 Milliseconds Start time of RVC
Data format see chapter 2.2.6.2
5502 Hours/minutes
5503 Month/day
5504 Time status/year
5505 to 5506 ΔU
max
of RVC 1 V ΔU
max
during RVC 1
5507 to 5508 ΔU
ss
of RVC 1 V ΔU
ss
during RVC 1
5509 to 5510 RVC 1 time duration s RVC 1 time duration
5511 Influenced Phase - Related phases
bit 0: Va, bit 1: Vb, bit 2: Vc,
bit 3: Vab, bit 4: Vbc, bit 5: Vca
if any bit =1 means corresponding
phase is influenced
SYS_SICAM_Q100_US.book Page 68 Thursday, September 24, 2020 1:17 PM

Other manuals for Siemens SICAM Q100

Related product manuals